But the theory behind it is the same as the Coil+, and that seems to work well, so I’m going to go out on a limb and say it works.

When using this device as an MTL, even at 20 watts you can happily get over 2 days battery life from this kit. It’s not exactly exciting to hold, but its functional, practical and is to the standard we expect from Innokin – even though its a pod mod. How To fill the Innokin Kroma-Z I went for simple: the 0.3Ω for Direct Lung, the 0.8Ω for a tight, restrictive Mouth-To-Lung vape. Innokin Kroma-Z Pod Mod – Flavour and Clouds Innokin Kroma-Z Pod Mod- the 0.3Ω Z-Coil In fact its quite lightweight but certainly feels well constructed and very comfortable to hold as either a thumb, or finger firer. I almost forgot, apparently Innokin suggest the higher the wattage you are using the higher the hertz you should use, (MTL is recommended at 50-100hz). Innokin Sensis – Battery and ChargingSo what I really want to know is what is the difference between manual and auto refresh (of course, that feature is only in F0). Can you help me with that?

For the 0.8Ω Z-Coil, recommended at 15 to 18 Watts, I went with a 50Vg 50PG 20mg Nic Salt – GotSalts – Peachy Promise. My Innokin Sensis, the Find F thingumabob, has finally arrived, and I went from being potentially one of the first people to get my hands on it to being the last person, thanks to UPS, but that’s a tale for another day.

What To Expect From The Innokin Sensis EZ Kit…

You can turn it upside down and shake it lightly without the adapter falling out. In fact I had to shake/jolt it, intent-fully before it fell off. Airflow wide open, its a fairly airy draw, and thanks to the drip-tip, the warmth comes through nicely, but the flavour is just a little plain that’s all. This allows the pod to fit in at any rotation and rotate 360degrees when connected. I think this type of connection is durable, secure, easy to use and convenient. The Innokin Sensis Pod

I like the way it vapes DTL, but for me this pod-mod is really all about MTL. DTL delivers very good flavor, but the whistling of airflow can be disturbing for some. The only con for the battery part of the kit is that the connection between it and the pod is not as strong as it could have been. Innokin either needs to use stronger magnets, or they need a snap-in connection. Innokin Sensis Battery and Charging In regards to charging it usually took 1.5 – 2 hours to charge, which might sound like a lot, but I don’t think it’s necessarily a negative thing, especially when the battery can last so long. Innokin Sensis 510 Adapter For me simply the best pod-mod if its about MTL. Z-coils are as always reliable, and the airflow can be set to very tight which for me is one of the most important things for an MTL vape.The airflow is similar to what we have seen on new devices over the last year or so, but why fix what’s not broken? The Innokin Sensis comes with 0.25 and 0.65 ohm Scepter Coils. These are new coils that are capable of handling higher wattages while allowing for restricted lung hits. The Innokin Sensis pod is round (like a tank), so therefore it has a round pod connection. With that in mind, I think the connection design is just ingenious. I also think that for the mode to be impactful you need to take at least 2-3 puffs before you start gaining the full effect. Do You Need To Refresh? According to Vapingpost.fr review, they tested the Sensis extensively with over 6200 puffs, and the least they can say is that it actually works. And even quite well. The coils have an exceptional lifespan (almost 50% more depending on the liquid and vape style).

With the DTL 0.3ohm coil at 35W you get around 290 puffs and with the MTL 0.8ohm coil I get 565 puffs out of one charge. That is a lot of puffs for MTL, one charge enough for 2-3 days of vaping. It produces a waveform output at the selected frequency. F0 creates and harness a new form of thermodynamic heating for vaping devices which is the first of its kind. F0 extends coil longevity, and you will enjoy more flavors over time. Coils press fit and can go in only one direction with its straight guiders on the pod. As said, you need to fasten the coil with the airflow ring as without airflow ring the device does not recognize the coil. You can replace a coil with the tank half full of you tilt the pod sideways while replacing. I could get all technical but there are MTL users who want that much ‘ precision‘– so I wont go there. The Innokin Kroma-Z Pods These new features are Coil+ and Refresh mode. It also has a complete starter kit with everyone a vaper needs and exceptional build quality. Sensis Vapor ProductionThe Innokin Sensis Pod Vape Kit is a mod pod device aimed to be vaped either mouth-to-lung or direct-to-lung. Featuring variable wattage with a 3000 mAh battery and an easy-to-fill top cap design. For example if you are using the Coil+ mode you will be using a little extra power after every puff.